Follow us on Steam Follow us on FB Follow us on Twitter Subscribe on Youtube

Announcement

Collapse
No announcement yet.

Tricking the rig

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tricking the rig

    3base here, been busy like a B! anywho, the farther along i go with IS/IT and information management and design (IMD) the more i get to know RE *the rig*.

    The farther i go, the more i know...so while i haven't been playing hard, i have been working hard!

    i thought i'd start this stream for any and all of us to share the proudest (or worst) moments of TRICKING THE RIG.

    For instance, i just installed two new little fans inside the casing, one a PCI card and the other a dual fan setup for cooling the hard disk. Setup was a snap, actually just a 4-pin connection to the power supply in both cases and the temperature inside the unit is at least 25% cooler (ballpark estimate). Both fans cost me $10 each at CompUSA's brick-and-mortar site here in Lexxx.

    It's all nice and cool, graphics are crunchier, crispier, just got Doom 3: Resurrection of E-ville, and, wowsers, what freakin' awesome graphics. My minitower's performance is better since i've installed the fans and other than one of the little fans on the dual setup for the HD i've had no problems (one of the fans died while leaning against a ribbon cable connected to the hard disk, sounded like a mouse squeaking in terror), but two out of three ain't bad, right?

    My next tweak? Just got a brand-new Hercules 450w power supply which also has two fans (however one will blow straight up into the casing, the other out the back end). My current power supply is the 250w that came with the Dell and after i tried to install my brother's hand-me-down nVid 5700 w/ 256Mb vram, my machine politely informed me that i didn't have the power to take advantage of the new card capabilities.

    If you all don't hear from me sooner something bad may have happened, however, my comp class is over next Monday so you all should be seeing me on the field much more often starting next week! God, i miss playing!

    Wish me luck!
    Daisy, Daisy, how do I love thee do...
  • #2

    was wondering what you were up to... this should be an interesting thread..

    Comment

    • #3

      I have a Tru 250 watt power supply and it runs my 6600GT card fine and have another 1 running a FX 5900.On the fan issue we had a bad fan in Brando's machine it took out everything except the Ti 4200 video card.Everything except the mother board was still under warranty.Just a warning on what the fans can cause.I try to keep an eye on them now,but had no idea that the fan could be that destructive.We have 4 desktops and they keep me busy on the maintanance end.{kiddo's cpu's mainly) Hope ta see ya up and going soon. Freak
      sigpic

      Comment

      • #4

        Sounds like you found a class that will come in real handy in the future 3base

        Best of luck....see you in the game ( hopefully)

        Comment

        • #5

          Hmmm....been taking pictures on the progress of my new server I'm building for home vids and pics. I'll post pics tonight but here's the lowdown on parts so far.

          ABIT KV7 Motherboard
          Aspire 500 WATT PS (Clear top, blue fans and UV reactive paint inside, green UV loomed wires and UV connectors)
          AMD Athlon XP 1800
          GeForce2 something or other (Had it laying around)
          1 GB Corsair PC3200
          4X Coolermaster CoolDrive 4
          4X 200GB WD Caviar HD's
          1 20GB WD HD
          1 20GB Maxtor HD
          CoolerMaster Jet 7+ CPU Cooler w/ front panel speed controller
          Pioneer 106D Slot Load DVD-Rom
          Highpoint RocketRaid 454
          Green fans in bottom half of case
          Blue fans in top
          Green Light in bottom
          UV Light in bottom
          Powersupply powerstrip inside case (very cool...lets you turn one standard connection into four)

          Still need to cut the windows, one on the upper right, then one in the standard place on the left. Pics tonight.

          Oh, and if I still have them, I'll post the pics of my gaming rig but here's the stats on that one:

          P4 2.8 Ghz 800Mhz FSB
          ASUS P4P800 MB
          1 GB Corsair XMS PC3200 Ram
          GeForce FX5800 128MB
          1 WD 120 GB HD
          1 Maxtor 120 GB HD
          2x Highpoint Rocket Heads (allows use of IDE drive on SATA chanels)
          Soundblaster Audigy 2 6.1 Soundcard and 6.1 Speakers
          SuperFlower Fan speed controller/temp monitor
          Soyo BayOne UFO Flash Memory reader/USB/Firewire 3.5" breakout box
          Antec Tru 480W PS
          Plextor 712 A DVD-R
          Plextor Premium CD-R
          Sony DVD Rom
          Blue Light
          4x Enermax Whisper thermo-sensing fans
          Slot exaust cooler

          Comment

          • #6

            Sounds like a sweet file server to me. I need to replace my old IBM "netfinity" server ( currently running Ventrilo, RoM's TS and RoM's clan server) with something more current. I have a P4-1.8 that I may use. This old Netfinity runs dual P3-800's and is bulletproof, but it's so loud I have to keep in the garage.

            Comment

            • #7

              Uh...
              2600 Athlon
              9800 Pro Vid card
              1 Gig of Ram
              LG DvD Player
              LG CD Burner
              80GB Seagate Harddrive
              60GB Harddrive(I think its A Maxtor)

              Comment

              • #8

                My gaming machine:

                1. Antec Sonata Piano Black case w/ Antec TruePower 380W power supply.
                2. MSI K8N Neo2 Platinum Socket 939 motherboard. (nForce 3 Ultra)
                3. AMD Athlon 64 3500+ 939pin processor
                4. 1gb Memory (2x512 DDR400) Super Talent with Heat Spreaders
                5. Raptor 74gb 10,000rpm hard drive
                6. Samsung 52x24x52/16x Combo CDRW/DVD drive
                7. Sony floppy drive
                8. XFX GeForce FX 6800 GT AGP 8x video card 256mb DDR3 TV/DVI
                9. Logitech MX 510 mouse
                10. Viewsonic Pro Series PT813 21 inch CRT

                The reason I didn't get a DVD-R is I burn on either my desktop Mac or my Mac 17inch Powerbook (or my wife's 12inch Powerbook, or my daughter's eMac).

                I also have a little Shuttle Spacewalker case I built a while back, running Windoze 2000 - I do all my GPS route mapping for my boat on this one and upload it to a Garmin eTrex Legend GPS unit.

                I crawled under my house a few years back and wired up Cat 5 everywhere - and of course I have wireless for those computers that are so equiped.

                So that's 4 Macs (not counting the 4 or 5 boat anchors in the closet) and 2 Windoze (not counting more closet crap). :lol: So I know what you mean by being kept busy maintaining everything on the your network Freak!
                r3m3MB3r... J00'R3 n07 901n9 70 4M0UN7 70 j4k_5kW@

                Bellingham, WA Photographer
                Growing old is mandatory, growing up is optional!

                Comment

                • #9

                  done, done and done, well sorta...the primary challenge has been fulfilled: folks, got me a new Hercules 450w power supply installed in my Dell minitower!

                  really easy to install too. super quiet, and, wow, every thing springs to life! overall speed has improved although i have yet to really see how things are really oncest in the throes of battle (got a date later tonight) but you all will definitely be seeing me in action again real soon!

                  the first major obstacle i encountered while switching out the power supply was the exhaust fan for the processor/heat sink, was literally a snap to remove.

                  also while snooping under the hood i got BOTH my new harddrive fans working, all i did was nudge 'em with my fingers like starting the propellors of an old-timey aeroplane, and voila, life sturred!

                  However, i was sad yet happy that the hand-me-down nVid 5700 Ultra when installed DIDN'T improve graphics but made them worse! had to run on 600x400 for Doom3! frame rate was well off from 30fps! so i reinstalled the original card, a nVid 5200 Ultra albeit w/ 128Mb (which is still nothing to sneeze at), things ran better than perfect.

                  So, i'm not concerned anymore (for the time being...) with upgrading the vid card.

                  i am, however, next concerned with upgrading the processor. currently i'm using the original socket 478 p4 3.0Ghz (actually, it's 2.99 acc. to the system profiler) with hyper-threading (a technology i gather 'tricks' the processor into thinking it's two processors?).

                  Anyone care to muse on Hyper-Threading?

                  anywho, i'm jonesing for this p4 3.40e socket 478 with a 1024 L2 cache! like the one i saw at newegg, pa! and for under 300 too...yes, precious, precious...

                  i digress.

                  i'm acquainted now with how processors work and the four-part machine cycle: fetch, decode, execute, and store. and i know now that L2 cache size means a great deal in how processors deal with memory.

                  Anyone care to muse on L2 cacheing?

                  My current system specs are this:

                  Dell 4600i
                  p4 3.0Ghz 800FSB 512 L2 cache w/ HyperThreading
                  1.5 Gb PC3200 DDR 400 RAM
                  nVidia 5200 Ultra 128VRAM
                  80Gb 7200rpm HD
                  Hercules 450w power supply
                  a shitload of fans
                  19" Mitsubishi CRT
                  Logitech surround sound w/ massive subwoofer

                  my wish list now includes:
                  another 512 of RAM, although i can go to 4, i would like to take it to 2 gigs
                  processor, of course
                  another harddrive, at least another 80giger
                  and then once i have the case made with some windows...
                  lights, lights, lights!

                  but i've been rambling, thoughts?
                  Daisy, Daisy, how do I love thee do...

                  Comment

                  • #10

                    Sounds good 3base. I have a P4 3.2 with 1Mb cache...these cpu's are fast...but run consideralbly hotter than the 512 L2 models. Keep that in mind if you upgrade...you'll need a real efficient heatsink/fan combo.

                    Comment

                    • #11

                      Ummmmmm


                      I thought this was an English forum
                      Something Clever Goes Here

                      Comment

                      • #12

                        need a new video card 3base ..

                        Comment

                        • #13

                          Hyperthreading divides the FSB in 4. Actually, your FSB is only 200, but because of HT, it's 800. Anyway, you're probably better off taking that extra 512 out, because HT works in pairs. Use one chip each in each color coded set of banks (mine are blue and black - if your are gonna use 1GB, put a 512 chip in each blue slot. Get it?) You need to buy a matched set of RAM (2x512)to up your's to 2GB. Do not mix brands in matching the set and do not mix timings over all. If you can help it, don't mix brands at all. You can find your timings like CAS, RAS, and CL by running SiSoftware's Sandra. You must match your timings exactly.

                          Comment

                          • #14

                            Originally posted by HTM|H_Mishima
                            Use one chip each in each color coded set of banks (mine are blue and black - if your are gonna use 1GB, put a 512 chip in each blue slot. Get it?) You need to buy a matched set of RAM (2x512)to up your's to 2GB. Do not mix brands in matching the set and do not mix timings over all. If you can help it, don't mix brands at all.
                            Which is exactly what I did with my low latency ram (1gb Memory (2x512 DDR400) Super Talent with Heat Spreaders). 1 gb of fast/matched RAM will outperform 2 gb's of mixed/brand/speed ram. IMHO
                            r3m3MB3r... J00'R3 n07 901n9 70 4M0UN7 70 j4k_5kW@

                            Bellingham, WA Photographer
                            Growing old is mandatory, growing up is optional!

                            Comment

                            • #15

                              Don't forget when you run dual channel mode you effectively trade memory size for speed. for instance I had 512 of dual channel ocz in my work machine...it wouldn't play assault until i put it in single channel mode because the speed was increased...but the storage area was reduced to 256. ( i know what you're thinking...why the hell would you play assault with 512 anyway? It is my work pc...not my gamer.)

                              Comment

                              Working...
                              X